Model: MCP 2003A
ISO, CE Mark,
WHO GMP
Basic Standards
·
Capacity:
0-180 Kgs
·
Graduation:
0.1 Kg
·
Display:
4 Digits LCD
·
Battery:
3V 7 Battery
·
Temp:
for work: 10-35 Deg. C
·
Turn
on auto, Up automatically on that
·
Unit:
Kg/lb
·
Turn
off after 10 seconds
·
Hint
of low-tension: “LO-“
·
Hint
of wrong: “…”
·
Hint
of out: :o-ld”
Operate Explain
·
Vibrate
the surface with foot and it will switch on automatically.
·
After
switch on, “8” will display and it will move from left to right until “0.0”
appears.
·
Stand
on the scale in balance and start to weigh, when the weigh is set, the figure
will flash and then you can read it.
·
The
figure will keep flashing for 10 seconds and the scale will switch off.
·
Replace
the battery if the screen display :LO”
·
Try
again if the screen shows “Err”
·
Keep
it dry and don’t touch water.
Attention
·
When
unused, the scale should be left unloaded to avoid over assumption of power and
failure of work.
·
Try
to stand in the middle place to avoid slip.
·
Stand
on the scale in good balance to avoid failure of lock and incorrect
illustration.
·
No
heavy knock on the scale.
·
Keep
it away from water and don’t wash it with water
·
Battery
have been set up.